Description
WKND Warrior for Line 6 HX Stomp presets by producer Aaron Rivera – 3 incredible HX Stomp bass presets to cover a wide range of music styles!
WKND Warrior 1
This preset was designed to be used in Stomp Mode and/or Snapshot mode.
WKND Warrior 1 features a rather simple signal chain that is powered by the natural sound of your instrument. That said, there is no amp/preamp block being used in this preset. Instead, this preset is engineered to maximize the natural sound of your instrument. It utilizes compression, overdrive, reverb, and a octave block. It is a similar signal chain to my previous preset “Integritty” but with a less “synthetic” sound overall. I would recommend WKND Warrior 1 to the bassist who wants the Swiss army knife of a preset.
WKND Warrior 2
This preset was designed to be used in Stomp Mode.
WKND Warrior 2 has some of the bells and whistles of WKND Warrior 1 but with a few additions. It features an overdrive that ONLY effects above a certain frequency. Which means, while the overdrive block is engaged, your lows stay strong, thick, and powerful, while the middle and high frequencies are overdriven. And the star of this preset is the “Side-chained” bass effect. It’s an incredible effect when used.
NOTE: The side-chained effect is best if used with the tap tempo to ensure correct timing of effect. Or save tempo to the preset if you know before hand.
WKND Warrior 3
This preset was designed to be used in Stomp Mode.
WKND Warrior 3 marries the features of WKND Warrior 1 & 2. It features a carefully tuned overdrive that cuts thru the mix, and a “side-chained” bass effect with a little more grit than in WKND Warrior 2.
NOTE: The side-chained effect is best if used with the tap tempo to ensure correct timing of effect. Or save tempo to the preset if you know before hand.
Compatible with:
Helix Floor
Helix Rack
Helix LT
HX Stomp
Helix Native
Helix Firmware 2.82
[one_half]
Demo 1
[/one_half]
[one_half_last]
Demo 2
[/one_half_last]
gabryga76@libero.it (verified owner) –
this preset works very well, especially the number 2, where there is a 280hz split crossover. I recommend increasing the attack times of the compressors to at least 20ms. The attached impulse response works very well, better than stock cabs and 3part’s iRs, which sound ‘distant’ and confusing.
LUIZ ARAUJO (verified owner) –
I am most likely happy with my purchase. Presets 2 and 3 worked like a charm for what I was looking for.
I would definitely recommend those.